Model Number

KK06-L

KK06-L
Maydos SBS Adhesive (Standard)
Description:
Maydos SBS Adhesive is formulated from excellent materials. It has good features such as easily construct, rapid drying speed, powerful viscidity, resist

ultraviolet radiation after solidification, be able to bear or endure canker, strike. Prevent damp, resist aging.
Where to Use:
Suitable for contacting between different materials such as plywood, board, floorboard, wallpaper, rubber, anti-firing plate, aluminum-plastic plate and cloths, etc.Features:
1. Healthier: Adopted benzene free, no hazardous materials and additives, low VOC, protect the applicator and consumers’ health.
2. High solid content: Solid content exceed 34%, much higher than conventional adhesives, effectively save adhesive consumption (dosage) by 30%-40%.
3. Freezing temperature resistant: no influence at -15℃ to -20℃. Easy for transport and bonding in winter.
4. Super first-bonding power, good penetration property, quick dry.
5. Stable performance: moisture resistant after hardening, water-immersion resistant, good impact resistant, long service life.
Technical Index:
Appearance: light yellow viscous liquid, no visible foreign matters.
Viscosity: 55-60 ku / 30℃
300-550 MPa. S/25℃
Solids Content: 34%-36%
Shear Strength: 30 minutes: ≥0.7mpa
48 hours: ≥1.1mpa
Specific Gravity: 0.86-0.87kg/L
VOC: ≤700 g/L
Application:
1. Surface conduct: the grease, smirch, rust, moisture of the contacted surface must be cleaned off, surface of bamboo, leather or rubber etc must be matted.
2. Brushing: the effect will be better if stir thoroughly or make the pot inverted repeatedly in order to mix the glue before use. The contacted surface is brushed by the adhesive in thin layer, brushing toward a same aspect for air getting out to strengthen the powerful viscidity.
3. Airing: wait for 5 to 25 minutes (25 Celsius) after brushing, until the condition is proper to agglutinate.
4. Contacting: contacting is level one time because the viscidity is super powerful, add pressure or tapping for the super viscidity of continuate adhesive.
Packing: 0.7L, 1L, 2L, 3L, 4L, 12L, 15L, 18L and 200L
Dosage: 195-250g/m2
Application Tools: Brusher, Scroller, Shaver, Trowel, etc.
Storage Condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5 - 35 Celsius, and the relative humidity shall be <80%.
Shelf Life: 18 months
Good Reminds:
1. The most suitable temperature and humidity for contacting (bonding): 20℃-30℃, humidity: 55%-75% ??
2. Adhesive contains VOC, easily burnt, keep away from fire. Make sure the construction site is well ventilated.
2. No. of Regulation On Transporting Dangerous Goods: 32196
3. This product conforms to China National Mandatory Standard:
GB18583-2001: Requirement of Limits Of Harmful & Hazardous Material
Formaldehyde<0.5g/kg
Benzene<5g/kg
Toluene+ Dimethylbenzene<200g/kg
Total Volatile Organic Compound<750g/L